LKV699-V2.0

1TX-to-4RXs 4K@60Hz Wireless HDMI Extender

This is a 4K@60Hz HDMI™ wireless extender, including a transmitter and a receiver. Adopting ipcolor STREAM technology can realize high definition and low-latency transmission. Based on the 5G wireless frequency band, with stable anti-interference and safety performance. It supports 1-to-1 wireless transmission, and the transmission distance can reach 50 meters, effectively solving problems caused by complicated wiring. It's an ideal wireless video transmission solution for video conferences, home entertainment, multimedia education, etc.

Introduction

Parameters

Downloads

Voltage/Current

DC 5V/2A

Power consumption

TX ≤ 5W, RX ≤ 4W

HDMI version

HDMI 2.0

HDCP version

HDCP 1.4/HDCP 2.2

Maximum transfer rate

18Gbps

Resolution supported

4096x2160@24/30/50/60Hz, 3840x2160@24/30/50/60Hz, 1080P@50/60Hz, 720P@50/60Hz, 1920x1200, 2560x1440

Input and output TMDS signal

0.7~1.2Vp-p（TMDS）

Input and output DDC signal

5Vp-p（TTL）

Wi-Fi Frequency bands

5.18~5.24 GHz

Transmission distance

One-to-one ≤ 50m;
One-to-two ≤ 30m;
One-to-three ≤ 20m;
One-to-four ≤ 15m

Latency

4K@60Hz: 130~220ms
1080P@60Hz: 70~120ms For reference only, delays may vary depending on the resolution, transmission distance, and connection capacity

Connection types

One-to-one
One-to-two
One-to-three
One-to-four

SSID pairing

Supported

ESD protection

1a Contact discharge level 3
1b Air discharge level 3
Standard: IEC61000-4-2
Lightning protection, Surge protection

Infrared frequency

20~60kHz

Receiving range

≤ 5m

Working temperature

-20~60℃

Storage temperature

-30~70℃

Humidity (no condensation)

0~90% RH

Dimension

TX: 115(W) x 125(L) x 20.6(H) mm
RX: 115(W) x 125(L) x 20.6(H) mm

Color

Black

Material

Iron

Net weight

TX: 305g; RX: 303g

Product Manual

Product specification

Update Firmware