Contact Us
LKV676P-US

4K@60Hz HDR Wall-Plate HDMI™ Extender

This is an HDMI™ wall plate extender kit and it can realize zero-latency transmission .The transmission distance is up to 70meter over CAT6/6A/7 network cable for 4K@60Hz UHD HDMI™ signal . It supports IR pass back which allows to control video source signal from display side. This wall plate HDMI™ Kit supports POC feature and its transmitter is powered by receiver, no power is needed for its transmitter. It is a reliable ultra-high-definition video transmission solution that can be widely used in security monitoring, home theater, broadcasting and other fields.
Introduction
Parameters
Downloads

LKV676P-US英文宣传信.jpg

HDMI cable
≤5m
Maximum transfer rate
18Gbps
Maximum transmission bandwidth
600MHz
EDID passthrough
Support
Compatibility
HDMI 2.0(Deep color, 4K, HDR, YUV4:4:4)
HDCP 2.2,HDCP1.4
Resolutions
480i@60Hz, 480p@60Hz, 576i@50Hz, 576p@50Hz, 720p@50/60Hz, 1080i@50/60Hz, 1080p@50/60Hz, 3840x2160@24/25/30/50/60Hz, 4096x2160@24/25Hz, 1280x960, 1280x800, 1280x768, 1680x1050, 1360x768, 1366x768, 1600x900, 1024x768, 800x600, 1920x1200
Transmission distance
CAT6/6A/7≤70m
Audio formats
LPCM/DTS-HD/DTS-Audio/Dolby Digital 5.1CH/Dolby Atmos
Receiving range
≤5m
Infrared frequency
20KHz~60KHz
Power Supply
TX: PoC (Powerd by RX)
RX:DC12V/1A
Power Consumption
Tx + Rx < 7W
Working temperature
0℃~60℃
Storage temperature
-30℃~70℃
Humidity
0~90%RH(No condensation)
Housing
Aluminum alloy + Iron
Weight
TX: 238.5g , RX:242.5g
Color
TX:Silver , RX: Black
Dimensions
TX: 70.0(L)x114.0(W)x51.0(H) mm
RX: 105.5(L)x102.5(W)x20(H)mm
Protection
ESD protection
1a Contact discharge level 2 (±4KV)
1b Air discharge level 3 (±8KV) Implementation of the standard: IEC61000-4-2
Lightning protection, Surge protection
Product Manual

Product specification

Update Firmware