Contact Us
LKV422

4x2 HDMI™ Matrix Switch 4096x2160@60Hz HDR

This is a 4-in 2-out HDMI™ matrix switch, which can switch 4 HDMI™ input signals to 2 HDMI™ displays as required. It supports up to 4096x2160@60Hz HDR resolution, with multiple switching methods (IR remote control, buttons, RS-232) to flexibly match input and output devices. HDMI™ outputs support auto down-scaling. Additional audio output is supported through the S/PDIF port and stereo jack. This device is a reliable, ultra-high-definition video transmission solution widely used in security monitoring, education and training, exhibition and broadcasting, command center, and other scenarios.
Introduction
Parameters
Downloads

LKV422英文竖版宣传信.jpg

HDMI version
HDMI 2.0(HDR, YUV444)
Compatible with HDCP 2.2, HDCP 1.4
HDMI interface
4 HDMI input, 2 HDMI output
Transmission rate
18Gbps
Resolutions
480i@60Hz, 480p@60Hz, 576i@50Hz, 576p@50Hz, 720p@50/60Hz, 1080i@50/60Hz, 1080p@50/60Hz, 3840×2160@24/25/30/50/60Hz, 4096×2160@24/25/30/50/60Hz
Audio format
LPCM7.1/DTS-HD/DTS-Audio/Dolby Digital plus/ Dolby TrueHD 7.1/Dolby Digital 7.1CH/Dolby Atmos
RS-232
3 Pin (GND/Rx/Tx), Baud rate 9600
Voltage
DC 5V/1A
Power consumption
<4W
Working temperature
-20℃~60℃
Storage temperature
-30℃~70℃
Humidity
0~90%RH (No Condensation)
Housing
Iron
Color
Black
Weight
375g
Dimensions
250.0(L) x 80.0(W) x 21.0(H) mm
Protection
ESD protection
1a Contact discharge level 2 (±4KV)
1b Air discharge level 3 (±8KV)
Implementation of the standard: IEC61000-4-2
Lightning protection, Surge protection
Product Manual

Product specification

Update Firmware