Flip embedded ceiling camera from Vaddio
It is in transport and fully rotated into its housing in standby mode, so that room occupants can visually confirm that the video feed is not active. RoboFLIP is an original 1080p@60 resolution camera (via HDBaseT and HDMI) using Exmor R CMOS sensor.
RoboFLIP camera is equipped with 30x optical zoom, which can capture video from a longer distance, and the camera's HDBT output can provide flexible installation options. Use PoE++ network switch or mid-span power injector for power supply for IP streaming configuration, or connect to HDBT video switch or OneLINK expansion system to achieve various video output. According to the OneLINK system you choose, you can choose HD-SDI, HDMI, USB and IP streaming options.
There are many different ways to control RoboFLIP. The camera comes with an infrared remote control, Telnet and serial RS-232 for connection to external third-party controllers. RoboFLIP is also compatible with the device controller recently released by Vaddio, which is used to control the camera's pan, tilt, zoom, preset, etc. on the touch screen. Integrators can adjust 16 stored PTZ presets, colors, white balance and focus, access system diagnostic logs, stream settings, etc. in its modern web-based user interface.
Vaddio's successful architectural camera series RoboFLIP cameras are easy to install. The camera has only one connection point, the HDBT port, which can provide PoE++ power, video, control and network. The clean lines and simple design provide another excellent architectural video conferencing solution for interior designers.