after
KanexPro will debut its new 2x1 USB-C and HDMI switch SW-2X1USBC with USB 3.0 ports for the first time.
SW-2X1USBC is designed to automatically switch between two devices with synchronized audio output, and is embedded in a balanced analog audio output, which is very suitable for ceiling speakers. SW-2X1USBC supports resolutions up to 4Kx2K@60Hz, 4:4:4, 8bit and 1080p/60, and provides one type B USB 3.0 port for host connection to PC and two type A USB for PC Port to support device expansion. HID devices, such as video conference cameras (VTC), microphones or keyboards. SW-2X1USBC provides charging on a USB-C port up to 60W, making it an ideal companion for MacBook and iPad.
KanexPro SW-2X1USBC has a variety of control methods. In automatic mode, SW-2X1USBC will automatically switch to the first source device detected. If the active signal source is removed, SW-2X1USBC will switch to the output with the lowest number. The SW-2X1USBC can be manually controlled intuitively through the panel buttons, RS-232 commands or any third-party control system.
As people increasingly need to connect USB-C-based laptops, tablets and other conference equipment, KanexPro stated that it has developed SW-2X1USBC, 2x1 USB-C and HDMI switches, which can be used between HDMI and USB-C Switch seamlessly.
It will be displayed in the following location
In booth 1-N15.
Please register below to get the latest information and exclusive offers of AV Network directly from your inbox!
Thank you for registering with AVNetwork. You will receive a verification email shortly.
There is a problem. Please refresh the page and try again.
AVNetwork is part of Future plc, an international media group and leading digital publisher.
.
©Future Publishing Co., Amberley Dock Building, Bath BA1 1UA. all rights reserved. The England and Wales company registration number is 2008885.
