|LENKENG TECHNOLOGY|Expert of High-Clear Video|----VGA TO AV|AV TO VGA|KTV Synchronous Apparatus|KTV Controller|LCD CMOS Chip-----------

If you want to display the movie that download from the network on the Home Theater.in other words.you want transform VGA into Video/Svideo signal..our LKV2000 WinMPG Video Convert is your best choice......
LKV2000 can triumphantly transform VGA into Video/Svideo signal.

--OEM ODM we are welcome --

-  1 entries VGA Fan-in,1 entries VGA Fan-out
-  1 entries Video Fan-in,1 entries Sideo Fan-out
-  1pcs DC 5V port power supply
-  Input VGA Resolution：640x480@60/72/75/85Hz,800x600@60/75Hz,1024x768@60/75Hz
-  output VGA\VIDEO\S-VIDEO signal at the same time
-  can display on LCD and TV in-phase
-  support system::NTSC( taiwan USA etc), NTSC-EIAJ(Japan), PAL(Europe、China),
    PAL-M(Brazil),PAL-N(Uruguay ,Paraguay) etc
-  support :OVERSCAN and UNDERSCAN
-  light,thin short,small for easy to carry .
-  bulk :110mm)x56mmx36mm

TOP

Name	Explain
(1)DC 5V	To connect ?computer’s usb port.
(2)modulator	Adjust :PAL/NTSC
(3)Video Out	To connect TV or VTR,VCR
(4)Svideo Out	To connect TV or VTR,VCR
(5)VGA Out	To connect LCD
(6)VGA In	To connect computer’s GC.(graphic card)

TOP

Name	Explain
(1)(2)(3)(4)	up/down/left /right key, can adjust AV menu’s position.
(5)MENU	press “menu” key will appear “OSD”.lasting press “OSD” for 3 secs will replacement
(6)ZOOM	Press to magnify the screen.twice press to comeback.

TOP

TOP

◇ Support PC and MAC
◇Plug & Play No software or driver requirement

Name	Qty	Remark
AV cable	1 pcs	--
VGA cable	1 pcs	--
Svideo cable	1 pcs	--
User manual	1 pcs	--
Mainframe of t Convertor	1 pcs	--
USB cable	1 pcs	for getting? power

TOP

1.1. No picture displayed.
  Checke to see if the cables are correctly connected.and check to see if the output end and input end are reversed.also make sure power cable is connected well.
2.No AV displayed
  Checke to see if the AV cable is in good condition and correctly connected. if ok.check to see if the Display terminal and TV set etc is switched to AV mode.
3.No S-video displayed.
  Checke to see if the S-video cable is in good condition and correctly connected if ok.check to see if the video output equipment is switched to S-video mode.
4.Interference in display.
  This may be caused by insufficient power supply from USB part,tyr an external 5V power supply.it may also result from the close placement with machines which can produce magnetic field.move the converter away to see if the display is improved.
5.Wry picture
  Check to see if the PC’s resolution degree and vertical frequency are supported by this converter,and also you can try to change the PC’s refresh frequency to see if it works.